Connecting Powerlogic P3 Protection Relay to the Smartphone & Tablet Application via Wireless Router
Issue:
How to connect a Powerlogic P3 protection relay to the Powerlogic P3 Smartphone & Tablet application using a wireless router.
Product:
PowerLogic / Easergy P3 Protection Relays
Environment:
Communication setup, WLAN connection, Easergy P3 mobile application
Cause:
Incorrect or unmatched IP addressing between the wireless router and the Powerlogic P3 relay, preventing the mobile application from detecting the device.
Resolution:
- Connect a wireless router to the Powerlogic P3 device.
- Match the IP address range of the router’s DHCP settings with the IP address assigned to the device under:
MENU → COMMUNICATION → Protocol Configuration. - Once the addressing matches, the Powerlogic P3 Smartphone & Tablet application will locate the relay based on the IP address you enter when initiating the connection.
- Alternatively, you may enable DHCP on the Powerlogic P3 under the same menu.
- The router will automatically assign an IP address dynamically.
- Ensure you also select “Enable IP verification service” to prevent duplicate IP address conflicts.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.