ATV630 - How do I display runtime in mins, not secs?
Issue:
How do I display runtime in mins, not secs? Can you change it only to mins or hours?
Product Line:
Altivar Machines, Altivar Process Drives
Environment:
All models and serial numbers
Cause:
Appears the drive automatically displays in secs, then mins and then hours. Appears it does not give you the option to change this.
Resolution:
The Altivar Process Drives automatically changes from seconds (until 59 sec), then to minutes (until 59 minutes), then hours. This cannot be presently changed at the present time, and there is not another solution or workaround.
How do I display runtime in mins, not secs? Can you change it only to mins or hours?
Product Line:
Altivar Machines, Altivar Process Drives
Environment:
All models and serial numbers
Cause:
Appears the drive automatically displays in secs, then mins and then hours. Appears it does not give you the option to change this.
Resolution:
The Altivar Process Drives automatically changes from seconds (until 59 sec), then to minutes (until 59 minutes), then hours. This cannot be presently changed at the present time, and there is not another solution or workaround.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.