Issue
Made setting and/or PSL changes but don't know how to load it into the MiCOM relay.
Product Line
MiCOM Px1x
MiCOM Px2x
MiCOM Px3x
MiCOM Px4x
Environment
Easergy Studio
Resolution
1. Right Click on the device name in Easergy Studio (MiCOM S1 Studio)
2. Select the settings and/or PSL files that need to be loaded.
3. Click Send
4. The relay will send the selected files and give a dialog box with information about the sending process.
5. When done click Close
6. Click Close again to finish.
Note: The only relays with PSL files will be the Px4x Series.
Made setting and/or PSL changes but don't know how to load it into the MiCOM relay.
Product Line
MiCOM Px1x
MiCOM Px2x
MiCOM Px3x
MiCOM Px4x
Environment
Easergy Studio
Resolution
1. Right Click on the device name in Easergy Studio (MiCOM S1 Studio)
2. Select the settings and/or PSL files that need to be loaded.
3. Click Send
4. The relay will send the selected files and give a dialog box with information about the sending process.
5. When done click Close
6. Click Close again to finish.
Note: The only relays with PSL files will be the Px4x Series.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.
