Is there a method that can be used to update all of the DTM's automatically in a Unity application after installing Control Expert 14?
If I open a Unity application after installing Control Expert, I get a message that inidicates my DTM's needs to be updated.
Is there a way to automatically update all of the DTM's with just one mouse click.
Product Line
Control Expert 14
Environment
Windows 8, Windows 10
Resolution
There is no method available for automatically updating all of the DTM's after installing Control Expert using 1 mouse click.
The only method available to update the DTM is by using the following steps:
- Open the Unity application.
- Open the DTM.
- Make a minor change to the DTM (i.e., Change the description by adding a space, etc.)
- Save the Unity application.
- Go back and delete the minor change
- Save the application again.
FAQ Applicable Conditions
Gepubliceerd voor: Schneider Electric Belgium


Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.