Magelis shows error "configuration file is not unicode"
Issue:
The Magelis HMI fails to boot properly and there is an application halt. The error on the dialog states the following:
Config problem:the configuration file is not unicode
KAOScore:PortableProjectConfiguration.cpp:line 406
Product Line:
Magelis HMI programmed Vijeo Designer (any version)
Resolution:
This error is a result of a corrupt Vijeo Designer installation on the PC where the software is installed. To resolve this issue, please re-install Vijeo Designer and re-download to the HMI.
The Magelis HMI fails to boot properly and there is an application halt. The error on the dialog states the following:
Config problem:the configuration file is not unicode
KAOScore:PortableProjectConfiguration.cpp:line 406
Product Line:
Magelis HMI programmed Vijeo Designer (any version)
Resolution:
This error is a result of a corrupt Vijeo Designer installation on the PC where the software is installed. To resolve this issue, please re-install Vijeo Designer and re-download to the HMI.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.