is it possible to read the FDR server located inside a CPU of a M580 PLC range
It's not possible to observe it.
The FDR server require login and password which are not available for the public.
However, in case of doubt, contact the technical support team.
They will escalade a specific case and will reproduce then help you to clarify the situation.
In a M580 Hot-Standby system, Schneider has implemented a DTM menu in "Control Expert" configuration tool which allow to synchronized the FDR server of the Standby CPU with the FDR server of the Primary CPU.
The FDR server require login and password which are not available for the public.
However, in case of doubt, contact the technical support team.
They will escalade a specific case and will reproduce then help you to clarify the situation.
In a M580 Hot-Standby system, Schneider has implemented a DTM menu in "Control Expert" configuration tool which allow to synchronized the FDR server of the Standby CPU with the FDR server of the Primary CPU.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.