Where is the access level in the ATV320 drive?
Issue:
Not able to find the access level (LAC) parameter in ATV320 drive
Product Line:
ATV320
Environment:
ATV320 all series
Cause:
Trying to find the LAC parameter in ATV320 drive, but not able to find it.
Resolution:
On the keypad:
Go to ConF, Full and then look for LAC (access level)
Options are: Basic (bAS); Standard (Std); Advanced (Adv); Expert (EPr).
Expert will allow you to work without restrictions in the drive.
In SoMove:
Go to “Parameters” tab, then go to “Full” in the left side menus and it will show the Access level parameter in the right area.
Not able to find the access level (LAC) parameter in ATV320 drive
Product Line:
ATV320
Environment:
ATV320 all series
Cause:
Trying to find the LAC parameter in ATV320 drive, but not able to find it.
Resolution:
On the keypad:
Go to ConF, Full and then look for LAC (access level)
Options are: Basic (bAS); Standard (Std); Advanced (Adv); Expert (EPr).
Expert will allow you to work without restrictions in the drive.
In SoMove:
Go to “Parameters” tab, then go to “Full” in the left side menus and it will show the Access level parameter in the right area.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.