Once export to Facility Export is done, you will see "Manufacturing completed" status in EPC.
After that :
1. Customer / Site / Switchboard (Will have device type / reference & serial number / address / QR code ) / All Asset list & hierarchy
2. Documents uploaded or generated in EPC will also be exported to EcoStruxure Facility Expert
3. Following data won't be exported : Device settings and EPC "Community" settings
Attention : NAM users cannot see "Manufacturing completed" button at all.
After that :
- You cannot modify any Assets (no add/remove/update asset information)
- You can upload documents
1. Customer / Site / Switchboard (Will have device type / reference & serial number / address / QR code ) / All Asset list & hierarchy
2. Documents uploaded or generated in EPC will also be exported to EcoStruxure Facility Expert
3. Following data won't be exported : Device settings and EPC "Community" settings
Attention : NAM users cannot see "Manufacturing completed" button at all.
Gepubliceerd voor: Schneider Electric Belgium




Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.