How do I create an admin badge for EVlink Pro AC ?
From the factory there is no admin badge recorded.
At the first power on of the charging station, the first badge tapped on the RFID reader is recorded as an admin badge. In this case the charging station will blink once. If the charging station does not blink it means there is another admin badge already recorded.
To create or erase another admin badge you need to use the eSetup app.
When you use a admin badge it is confirmed by a green smooth pulsing of the LED during 1 minute
At the first power on of the charging station, the first badge tapped on the RFID reader is recorded as an admin badge. In this case the charging station will blink once. If the charging station does not blink it means there is another admin badge already recorded.
To create or erase another admin badge you need to use the eSetup app.
When you use a admin badge it is confirmed by a green smooth pulsing of the LED during 1 minute
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.