What is the default password for EcoStruxure Panel Server?
From firmware version v002.005.000 onward, all EcoStruxure Panel Server (PAS) models include a default Username: SecurityAdmin and Password: AAAAAAAA. These credentials are required during the initial installation or after a factory reset, but they can be changed once the setup is complete. Refer to the User Guide for additional details.
In general, the PAS requires the default username and password when accessing the device locally. However, when configuring Data Publication settings or managing Cybersecurity features, the default credentials must be changed to ensure proper security.
Figure 1: Initial commissioning
This can initially be completed using one of the following methods:
• EcoStruxure Power Commission (EPC) software. Download here.
• The EcoStruxure Panel Server (PAS) homepage via its embedded web interface.
The EcoStruxure Panel Server documentation can be found in the following links:
If you are unable to log into the webpage due to a lost or forgotten password, refer to the User Guide under “Resetting to Factory Settings� for instructions.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.