Yes, It is possible to update the BMENUA0100 module firmware via the SERVICE port of the M580 CPU:

1- The module should be on "Secured" mode ( more details here: https://www.se.com/id/en/faqs/FAQ000235297/)

2- A user account with "Installer" role must be created via the module webpage ;




3-  With EcoStruxure Automation Device Maintenance tool, configure the BMENUA0100 backplane IP address to connect to the module:



4- Use the user account with the "installer" role previously created:




5- If it was the first time you connect to the module, It could ask to trust its certificate:



6- Select the firmware to upload:




7- Launch the update and follow the steps:


Best Regards.

Gepubliceerd voor: Schneider Electric Belgium