Why does my Smart UPS Modular Ultra show "Unknown UPS internal error [3B7D-00A0]" on the display?
Issue:
Product Line:
Environment:
Resolution:
This specific message occurs when the Redundant Intelligence Module (RIM) is initializing after power up. In later versions of the NMC/Display firmware, the messaging is changed to "RIM initializing, Do not remove MIM". Please upgrade the NMC/Display firmware to SUCAN 2.5.1.3 to see update messaging. You can upgrade the firmware by following this FAQ: https://www.apc.com/us/en/faqs/FAQ000261841/
After performing a UPS Firmware upgrade, removing and installing the Intelligence Modules, or when the UPS is booting up from a brains dead, you may see the display show "Unknown UPS internal error [3B7D-00A0]".
Product Line:
Smart UPS Modular Ultra
Environment:
All models, all serial numbers
Resolution:
This specific message occurs when the Redundant Intelligence Module (RIM) is initializing after power up. In later versions of the NMC/Display firmware, the messaging is changed to "RIM initializing, Do not remove MIM". Please upgrade the NMC/Display firmware to SUCAN 2.5.1.3 to see update messaging. You can upgrade the firmware by following this FAQ: https://www.apc.com/us/en/faqs/FAQ000261841/
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.