How to load an M172 project with a USB memory stick?
- The power to the M172 should be turned off (no connections to the USB mini port for programming).
- Insert the USB stick and then apply power.
- At boot-up the M172 will detect the USB memory stick and will copy the project from the USB device into the PLC.
- When the copy process is finished only the Green LED on the M172 will be lit.
- Remove USB memory stick and then power cycle the M172 PLC.
- The new program will begin operating.
Modicon M172 Logic Controller Hardware Guide
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.