Use the following steps for configuring Control Expert to communicate with the M580 CPU through the BMENUA0100 control port in HTTPS secure  mode.

• Open the Security Editor.
• Whitelist the M580 CPU certificate in the Security Editor.
• Apply the changes.
• Close the Security Editor.

• Open the BMENUA0100 web page.
• Enable the IP forwarding service.

• Enable the HTTPS service.

• Disable IPSEC if it is not being used.

• Connect to the M580 using the BMENUA0100 control port IP address.

Gepubliceerd voor:Schneider Electric Belgium