What value is expected when measuring capacitance of individual capacitors in a Powerlogic PFC capacitor bank?
Issue:
It may not be clear what value is to be expected when measuring capacitance for capacitors in a Powerlogic PFC capacitor bank.
Product Line:
Powerlogic PFC capacitors
Resolution
There will be a uF rating on the label of the capacitor. The L-L measurement taken should be 1.5X the value printed on the capacitor label. The photo below shows a typical label and where this value can be found.
Example: BLRCH292A350B57, the capacitance per phase for this capacitor is 93.8uF. 93.8 X 1.5 =140.7uF
You would need to measure line to line (A to B, B to C, and C to A) on the capacitor and the values should be around 140uF -/+5% for each measurement.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.