How to Retrieve Maintenance Log from PowerLogic P5 Relay
Issue:
Need to obtain the internal maintenance log file from an PowerLogic P5 relay for troubleshooting or analysis.
Product:
PowerLogic P5 Protection Relay
Environment:
- PowerLogic P5 relay
- Latest eSetup Easergy Pro software (downloadable from Schneider Electric website)
- PC connected to the relay via front USB port
- Relay powered off (HMI should display “5V USB only”)
Cause:
Maintenance logs are stored internally in the relay and require specific steps and credentials to access.
Resolution:
1.-Download and install the latest eSetup Easergy Pro software from Schneider Electric’s website.
2.- Ensure the relay is not powered on. Connect the P5 relay to the PC using the front USB port.
3.- Wait until the relay HMI displays “5V USB only”.
4.- In Easergy Pro, click Read Maintenance Log File.
5.- Log in using the following credentials:
Login: InstallerLevel
Password: AAAA
6.- Save the log file to your desired location. The file will have the extension .p5I.
7. - Send the .p5I file to the Advance Tech support team for further analysis.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.