Issue: Can a new style LRD33 be used in place of the old style LR2D33 Product Line: Tesys D contactors and overload relays Environment: Products sold and used in the United States Cause: Replacing an...
This is simply a flying lead cable and below is the color code. It can be used for any 40 way terminal module. There would be no way to provide color to channel information. Using the wiring diagram...
Issue: Motor HP rating tables for sizing of upstream Circuit Breakers and Safety Switches Product Line: Circuit Breakers (inverse-time thermal-magnetic and electronic) and Safety Switches Resolution:...
Issue: Where is a Table with Nema enclosure ratings definitions? Product Line: Enclosures Environment: Application Cause: Degrees of Protection for enclosures Resolution: Definition descriptions are...
Issue: What is the difference between a 80% rated breaker and a 100% rated breaker? Do we have a list of 100% rated circuit breakers? Resolution: For a particular breaker, even though the 80% and...
Issue The user may need to know what the EcoStruxure Panel Server password is during the initial installation. Product Line EcoStruxure Panel Server (The 3 models of EcoStruxure Panel Server are...
Issue: Breakers used in the NBLP Federal Pioneer Panelboards Product Line: FPE Panelboards Environment: Applies to NBLP, NBC, NBDP, CDP type panelboards Resolution: The NBLP panelboards take NB type...
Issue: Service Interface spare parts, what is included in the LV485500 service interface kit Product Line: Circuit Breakers Environment: Masterpact NW, NT Powerpact P R Resolution: The LV485500...
Before getting started make sure that you have Upgrade Studio installed on your laptop and that you have an account to log in. You also must have already activated your TREX communicator. Go to...
Most industrial proximity sensors (inductive, capacitive, ultrasonic and photo electric) are solid state. The term solid state refers to the type of components used within the sensor. Solid state...
There is often confusion between the in-phase and the In-sync features of ASCO transfer switches. It is important to understand the difference between these features especially during the process of...
Issue: How to become a supplier for Schneider Electric Product Line: Source Materials Environment: Products sold and used in the United States Resolution: For information and help on becoming a...
Issue: What are the utilization categories AC-1 and AC-3? Product Line: Schneider Electric Products Environment: Inductive and Resistive Loads Resolution: AC-1 - This category applies to all AC loads...
NOTE: M218 are obsolete controllers, from v2.2 they stopped being integrated into Machine Expert. Machine Expert v2.1 or below is needed for the Local Offer Code to work The M218 controllers are not...
Issue: How does humidity affect insulation resistance testing results? Product Line: Circuit Breakers Environment: Molded case and insulated case breakers Resolution: High humidity can drastically...
NEMA Standards Publication 250-1997, "Enclosures for Electrical Equipment (1000 Volts Maximum)" no longer lists this enclosure type. This enclosure type is commonly accepted to be referring...

Support Center
Download Center
Issue: Can a new style LRD33 be used in place of the old style LR2D33 Product Line: Tesys D contactors and overload relays Environment: Products sold and used in the United States Cause: Replacing an older overload relay, but not the contactor Resolution: Yes . The TeSys LRD33** overloads...
This is simply a flying lead cable and below is the color code. It can be used for any 40 way terminal module. There would be no way to provide color to channel information. Using the wiring diagram for the appropriate module, the pin number will substitute for color. This article contain images
Issue: Motor HP rating tables for sizing of upstream Circuit Breakers and Safety Switches Product Line: Circuit Breakers (inverse-time thermal-magnetic and electronic) and Safety Switches Resolution: If a circuit breaker or safety switch is to be used to protect a motor, the attached table has...
Issue: Where is a Table with Nema enclosure ratings definitions? Product Line: Enclosures Environment: Application Cause: Degrees of Protection for enclosures Resolution: Definition descriptions are below: NEMA 1 enclosures are typically used for protecting controls and terminations from objects...
Issue: What is the difference between a 80% rated breaker and a 100% rated breaker? Do we have a list of 100% rated circuit breakers? Resolution: For a particular breaker, even though the 80% and 100% versions have the same amp rating (use the same trip curve), in actual use they are applied...
Issue The user may need to know what the EcoStruxure Panel Server password is during the initial installation. Product Line EcoStruxure Panel Server (The 3 models of EcoStruxure Panel Server are Universal (PAS600 series), Advanced (PAS800 series), and Entry (PAS400, available later)....
Issue: Breakers used in the NBLP Federal Pioneer Panelboards Product Line: FPE Panelboards Environment: Applies to NBLP, NBC, NBDP, CDP type panelboards Resolution: The NBLP panelboards take NB type breakers.
Issue: Service Interface spare parts, what is included in the LV485500 service interface kit Product Line: Circuit Breakers Environment: Masterpact NW, NT Powerpact P R Resolution: The LV485500 Service Interface kit includes the below accesories, if replacement parts are needed you may order each...
Before getting started make sure that you have Upgrade Studio installed on your laptop and that you have an account to log in. You also must have already activated your TREX communicator. Go to Schneider Electric website ( www.se.com ) or the FieldComm Group website (...
Most industrial proximity sensors (inductive, capacitive, ultrasonic and photo electric) are solid state. The term solid state refers to the type of components used within the sensor. Solid state electronic components such as transistors are used to switch the output of the sensor upon detection...
There is often confusion between the in-phase and the In-sync features of ASCO transfer switches. It is important to understand the difference between these features especially during the process of selecting transfer switches for different applications. In-Phase The in-phase monitor is a feature...
Issue: How to become a supplier for Schneider Electric Product Line: Source Materials Environment: Products sold and used in the United States Resolution: For information and help on becoming a supplier for Schneider Electric please refer to the supplier resource center linked below:...
Issue: What are the utilization categories AC-1 and AC-3? Product Line: Schneider Electric Products Environment: Inductive and Resistive Loads Resolution: AC-1 - This category applies to all AC loads where the power factor is more than 0.95. These are primarily non-inductive or slightly inductive...
NOTE: M218 are obsolete controllers, from v2.2 they stopped being integrated into Machine Expert. Machine Expert v2.1 or below is needed for the Local Offer Code to work The M218 controllers are not sold or supported in the US, they are only sold and supported in Asia. So to have access to them you...
Issue: How does humidity affect insulation resistance testing results? Product Line: Circuit Breakers Environment: Molded case and insulated case breakers Resolution: High humidity can drastically reduce insulation resistance testing results for circuit breakers. Some equipment acceptance testing...
NEMA Standards Publication 250-1997, "Enclosures for Electrical Equipment (1000 Volts Maximum)" no longer lists this enclosure type. This enclosure type is commonly accepted to be referring to a NEMA 1 enclosure with a gasketed cover.
