Type M and T Integral Horsepower Starters

Available in NEMA Sizes M-0, M-1, and M-1P

Poles
·         AC: Two poles single phase; three poles polyphase
·         DC: 2 poles (without Low Voltage Protection only)
·         600 Vac and 250 Vdc maximum

Melting alloy thermal overload relays have provisions for one Type B thermal unit for single phase starters and three Type B thermal units for three phase starters (All thermal units must be installed and the device reset before the starter contacts will operate)

Operator
·         Push button or toggle operator in open and NEMA Type 1
·         Direct-acting push button only on NEMA Types 4 and 12
·         External toggle to actuate a push button device inside on NEMA Types 4X, 7 & 9
Convenient mechanism Lock Off
·         Available on Both open devices and starters in NEMA Type 1 (surface/flush mounting)
·         Locked in Off or Stop position
·         NEMA Types 4, 4X, 7 & 9, and 12 enclosures locked closed to prevent unauthorized entry

NEMA Type 1 surface mounting, 4, 4X, 7 & 9 and 12 enclosures
·         Power terminals have pressure wire or box lug. Auxiliary interlock terminals have pressure wire
·         Auxiliary contacts N.O. or N.C. for AC loads only
·         Red pilot light kits are available for use on various voltages between 100 and 600 V for convenience

Reversing manual starters consist of two mechanically interlocked Type M or T manual starters.
·         Available in NEMA Type 1 surface-mounting enclosures or as open type
Two-speed manual starters are for wye-connected separate winding motors only.
·         Consist of two mechanically interlocked Type M or T manual starters
·         Available with or without low voltage protection in NEMA Type 1 enclosures or open type

Meets UL and CSA requirements