How is the sleep/wake (low speed timeout) programmed on the ATV212 drives?
Issue:
Sleep/wake operation (low speed timeout) programmed on the ATV212 drives.
Product Line:
Altivar ATV212
Environment:
All
Cause:
Allows the drive to shut off after running at a preset low speed for a preset period of time.
Resolution:
The sleep/wake threshold is defined as LL + F391.
The time period to trigger sleep mode is F256.
If the drive operates at or below the threshold (LL + F391) for a period of time (F256), the drive will decelerate to a stop and flash LStP. It will remain stopped until the speed reference again exceeds the threshold (LL + F391). The drive will then accelerate to the new reference.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.