How can I setup Vijeo Citect to communicate to a controller via Modbus Plus using the TSXCUSBMBP adapter?
This documents explains the steps involved in configuring Vijeo Citect to communicate to a controller via Modbus Plus protocol.
This procedure uses the Vijeo Citect MBPLUS Driver.
1) Configure the I/O Server, Boards, Ports and I/O Devices as shown below:
2) Testing with a Quantum / Unity Controller which requires to select the MBPLUS20 Protocol.
Attachments
3) Install the latest version of the MBPLUS driver. Note: you will need to install the latest version of the Modbus Plus MBx driver.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.