How to configure the STBEHC3020 for modulo mode
Issue
How to configure the STBEHC3020 for modulo mode.
Product Line
All versions of the Advantys Configuration Software.
Environment
Windows 7
Resolution
Connect the 'STBEHC3020' to the incremental encoder and configure the parameters in the Advantys Configuration software using the following instructions:.
- Double click on the 'STBEHC3020' module to open the properties window for the module.
· Configure the parameters as shown.
· Download the application to the island.
· Start the PLC.
· Place the PLC into test mode.
Set the Input Validation bits to Off.
Set the Counter Enable to On.
Set the Counter Sync bit to On.
To reset the counter, toggle the counter sync bit from 0 to 1.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.