How to change the relay configuration on an ATS22?
Issue:
Relay R1 and R2 programming on an ATS22
Product Line:
Altistart 22
Environment:
All
Cause:
Relay 1 or 2 needs a new assignment.
Resolution:
First, open access to the IO menu by going to the ConF menu, set LAC = ON.
Then go to the IO menu and set r1 or r2 to the appropriate configuration.
Relay R1 and R2 programming on an ATS22
Product Line:
Altistart 22
Environment:
All
Cause:
Relay 1 or 2 needs a new assignment.
Resolution:
First, open access to the IO menu by going to the ConF menu, set LAC = ON.
Then go to the IO menu and set r1 or r2 to the appropriate configuration.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.