Issue:
ATS48 programmable relay for run status
Product Line:
ATS48 Altistart 48
Environment:
All
Cause:
Need contact closure with run command
Resolution:
Yes, R3 is a programmable relay, and its factory default is [rnl] 'motor powered' to indicate run status.
The ATS48 also has 2 logic outputs that can be programmed to indicate the motor is running or several other functions.
ATS48 programmable relay for run status
Product Line:
ATS48 Altistart 48
Environment:
All
Cause:
Need contact closure with run command
Resolution:
Yes, R3 is a programmable relay, and its factory default is [rnl] 'motor powered' to indicate run status.
The ATS48 also has 2 logic outputs that can be programmed to indicate the motor is running or several other functions.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
