Why do I get Diagnostic error code 0x000401 on a PM8ECC after I set a new IP address?
Issue:
After setting an IP address in the PM800's PM8ECC there appears a diagnostic error 0x000401.
Product Line:
PM800
PM8ECC
Environment:
PM800
PM8ECC
Cause:
Occurs when the PM8ECC has been programmed with a duplicate IP address.
Resolution:
Change the IP address to an IP that is not being used by another device.
After setting an IP address in the PM800's PM8ECC there appears a diagnostic error 0x000401.
Product Line:
PM800
PM8ECC
Environment:
PM800
PM8ECC
Cause:
Occurs when the PM8ECC has been programmed with a duplicate IP address.
Resolution:
Change the IP address to an IP that is not being used by another device.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.