How do you set up the ATV12 drive for 3 wire control?
Issue:
3 wire control setup on an ATV12
Product Line:
Altivar ATV12
Environment:
All
Cause:
He has 2 momentary pushbuttons 1 NC for stop and 1 NO for start
Resolution:
Arrow down to the FULL menu enter
Arrow down to IO menu enter
find tCC enter and set this to 3C ( you will need to hold the enter button for 3 seconds before it will change from 2C to 3C)
3 wire control setup on an ATV12
Product Line:
Altivar ATV12
Environment:
All
Cause:
He has 2 momentary pushbuttons 1 NC for stop and 1 NO for start
Resolution:
Arrow down to the FULL menu enter
Arrow down to IO menu enter
find tCC enter and set this to 3C ( you will need to hold the enter button for 3 seconds before it will change from 2C to 3C)
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.