Where can I find the System Integrator documentation for 2 PowerLogic SCADA, PowerSCADA Expert, Power SCADA Operation, 3 or EcoStruxure Power Operation?
Issue
System integrator documentation is needed to commission, configure, or troubleshoot PowerLogic SCADA, PowerSCADA Expert, Power SCADA Operation, or EcoStruxure Power Operation.
Product Line
PowerSCADA Expert 8.0
PowerSCADA Expert 8.1
PowerSCADA Expert 8.2
Power SCADA Operation 9.0
Power SCADA Operation 2020
EcoStruxure Power Operation 2024
Note: PowerLogic SCADA, PowerSCADA Expert, and Power SCADA Operation are legacy product names and versions. The current product is EcoStruxure Power Operation.
Environment
Citect Explorer
Project Editor
Graphics Builder
Graphics Editor
SCADA system configuration
Commissioning and troubleshooting
Cause
The applicable system integrator manual or system guide is required to configure, commission, maintain, or troubleshoot the installed SCADA software version.
Resolution
Refer to the attached documentation for the following versions:
- PowerSCADA Expert 8.0
- PowerSCADA Expert 8.1
- PowerSCADA Expert 8.2
- Power SCADA Operation 9.0
- For EcoStruxure Power Operation 2024, download the current System Guide directly from Schneider Electric: EcoStruxure Power Operation 2024 with Advanced Reporting and Dashboards System Guide | Schneider Electric
The document naming changed between releases:
- In PowerSCADA Expert 8.2, the document is named PowerSCADA Expert 8.2 Help Manual.
- Starting with Power SCADA Operation 9.0, the document is named Power SCADA Operation System Guide.
- The current product documentation is named EcoStruxure Power Operation System Guide.
Always use documentation that matches the software version installed on the system. Configuration screens, supported components, system requirements, and workflows may differ between versions.
Recommendation
If you are using an older version of
Power Scada Operation(PSO), consider upgrading to the latest version for improved protocol support and security. For assistance with integration or upgrades, contact Schneider Electric Technical Support at: pmo.support@se.com