Is the CAN J1939 Protocol supported by SoMachine 4.1, 4.2 or 4.3?

The CAN J1939 Protocol provided by CODESYS and its Online Help documentation is delivered in a separated Add on that can be installed on top of SoMachine V4.1 SP2, 4.2 or 4.3. This protocol is  supported on M241/M251 controllers only. This add on is free of charge. It will neither be shared on SESU nor www.schneider-electric.com, only through ADEs, SAEs and customer support.

If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)

Udgivet til: Schneider Electric Danmark