Issue:
Getting a CLr fault on the ATV212.
Product Line:
ALTIVAR 212
Environment:
All models
Cause:
Troubleshooting
Resolution:
CLr [Reset active] is a status which is displayed after the STOP/RESET key is pressed while a detected fault is displayed. It indicates that the cause of the detected fault has cleared and the fault status can be reset. Press the STOP/RESET key again to clear the detected fault. This type of fault reset only applies when in Local mode or in Remote mode with CMOd=1 ( HMI ). It also only applies to the following faults:
Getting a CLr fault on the ATV212.
Product Line:
ALTIVAR 212
Environment:
All models
Cause:
Troubleshooting
Resolution:
CLr [Reset active] is a status which is displayed after the STOP/RESET key is pressed while a detected fault is displayed. It indicates that the cause of the detected fault has cleared and the fault status can be reset. Press the STOP/RESET key again to clear the detected fault. This type of fault reset only applies when in Local mode or in Remote mode with CMOd=1 ( HMI ). It also only applies to the following faults:
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
