What would cause the motor to jerk up and down when running an ATV312 drive?
Issue:
Motor jerking up and down when running an ATV312
Product Line:
Altivar ATV31 and ATV312
Environment:
All
Cause:
Motor is not running smooth its jerking back and forth.
Resolution:
Check the motor nameplate for the correct motor data. Enter this data into the DRC and SET menu
DRC menu enter
BFr= 60hz
UNS= 230vac or 460vac motor voltage
FRS= 60hz
NCr= 2.4 amps for whats stamped on the motor name plate
COS= .80
UFT= Change to L
SET menu
ACC= 1 to 10 seconds
DEC= 1 to 10 seconds
LSP= Choose
HSP= Choose
ITh= 2.4 amps or whats stamped on the motor name plate
URF= 40%.
Motor jerking up and down when running an ATV312
Product Line:
Altivar ATV31 and ATV312
Environment:
All
Cause:
Motor is not running smooth its jerking back and forth.
Resolution:
Check the motor nameplate for the correct motor data. Enter this data into the DRC and SET menu
DRC menu enter
BFr= 60hz
UNS= 230vac or 460vac motor voltage
FRS= 60hz
NCr= 2.4 amps for whats stamped on the motor name plate
COS= .80
UFT= Change to L
SET menu
ACC= 1 to 10 seconds
DEC= 1 to 10 seconds
LSP= Choose
HSP= Choose
ITh= 2.4 amps or whats stamped on the motor name plate
URF= 40%.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.