How is a dynamic braking resistor added to an ATV32 drive?
Issue:
Addition of dynamic braking resistor on ATV32.
Product Line:
Altivar 32
Environment:
All
Cause:
N/A
Resolution:
Wiring:
The resistor should be wired to the PA and PB terminals on the drive.
Programming:
DRI- > CONF > FULL > FUN- > STT
Go into CONF menu, then FULL menu, then FUN menu.
Under FUN, go into STT- menu.
Set brA to [No].
Addition of dynamic braking resistor on ATV32.
Product Line:
Altivar 32
Environment:
All
Cause:
N/A
Resolution:
Wiring:
The resistor should be wired to the PA and PB terminals on the drive.
Programming:
DRI- > CONF > FULL > FUN- > STT
Go into CONF menu, then FULL menu, then FUN menu.
Under FUN, go into STT- menu.
Set brA to [No].
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.