Issue:
S-Flex (ATV212) ramping motor up to 60 Hz, but not following analog input.
Product Line:
S-Flex enclosed drive ATV212, Altivar 212 ATV21, Altivar 21
Environment:
All part numbers, all models
Cause: Not operating as expected
Resolution:
1) Verified FMOd is set properly (1 for VIA, 2 for VIB, 3 for HMI, 4 for Serial Communication).
2) Check logic input programming to be sure a preset speed command is not present (F108, F110, F111, F112, F113, F118)
3) Make sure F360 (PID Control activate) is set to 0 if not using PID in the drive.
4) If using PID control, check feedback signal and setpoint.
Consult ATV212 programming manual for details.
S-Flex (ATV212) ramping motor up to 60 Hz, but not following analog input.
Product Line:
S-Flex enclosed drive ATV212, Altivar 212 ATV21, Altivar 21
Environment:
All part numbers, all models
Cause: Not operating as expected
Resolution:
1) Verified FMOd is set properly (1 for VIA, 2 for VIB, 3 for HMI, 4 for Serial Communication).
2) Check logic input programming to be sure a preset speed command is not present (F108, F110, F111, F112, F113, F118)
3) Make sure F360 (PID Control activate) is set to 0 if not using PID in the drive.
4) If using PID control, check feedback signal and setpoint.
Consult ATV212 programming manual for details.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
