How configure VMWare in mode NAT and SoMachine for M251 communication via ETH 2 port
Use the following method with the VMWare configured in NAT mode:
1. Configure SoMachine the communication via "active path":
2.In the Communication Settings window , add a gateway and use the IP address of the physique PC.
3.Select the new gateway and Scan it
4. Now you can connect to the M251
1. Configure SoMachine the communication via "active path":
2.In the Communication Settings window , add a gateway and use the IP address of the physique PC.
3.Select the new gateway and Scan it
4. Now you can connect to the M251
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.