I intend to monitor a system with RM35JA32MW relay at which the current comprises both the AC and DC components. Can the product function correctly?
YES, the product can function correctly.
Below is the front panel setting and waveform diagram.
Ti = Starting inhibit time delay adjustment potentiometer.
Function: On energisation, an inhibit time delay (1…20 s) makes it possible to inhibit (or ignore) current peaks on start-up of equipment.
You can try to adjust the RM35JA32MW product’s Ti setting to inhibit the inrush current during load start-up.
Below is the front panel setting and waveform diagram.
Ti = Starting inhibit time delay adjustment potentiometer.
Function: On energisation, an inhibit time delay (1…20 s) makes it possible to inhibit (or ignore) current peaks on start-up of equipment.
You can try to adjust the RM35JA32MW product’s Ti setting to inhibit the inrush current during load start-up.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.