Issue:
Can I use function block GMC.Control_ATV to control an ATV340 using a SoMachine PLC?
Product Line:
SoMachine V4
Resolution:
You can use function block GMC.Control_ATV to control an ATV340 but you need to adjust the I/O mapping of the drive.
Can I use function block GMC.Control_ATV to control an ATV340 using a SoMachine PLC?
Product Line:
SoMachine V4
Resolution:
You can use function block GMC.Control_ATV to control an ATV340 but you need to adjust the I/O mapping of the drive.
The I/O mapping of the drive can only be adjusted with the DTM commissioning software.
The library uses the assemblies 100 and 101 and requires the following mapping:
- For assembly 100 (controller to drive):
- First word: CMD (logic address 8501)
- Second word: LFRD (logic address 8602)
-
- For assembly 101 (drive to controller):
- First word: ETA (logic address 3201)
- Second word: FRRD (logic address 8604)
- Third word: LCR (logic address 3204)
-
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
