Issue:
Setting up jog function similar to the other Altivar Drives
Product line:
Altivar 630, Altivar 650, Altivar 660
Environment:
all
Cause:
n/a
Resolution:
A Jog function is not available on the Altivar 600 series drives. It is available on the 900 series drive.
If the VFD is set for 3-wire control, then change to the 900 series.
If the VFD is set for 2-wire control, then the Preset Speeds function may be acceptable. Note that the Preset speed used for the jog speed will not run the motor at less than the Low Speed setting.
Setting up jog function similar to the other Altivar Drives
Product line:
Altivar 630, Altivar 650, Altivar 660
Environment:
all
Cause:
n/a
Resolution:
A Jog function is not available on the Altivar 600 series drives. It is available on the 900 series drive.
If the VFD is set for 3-wire control, then change to the 900 series.
If the VFD is set for 2-wire control, then the Preset Speeds function may be acceptable. Note that the Preset speed used for the jog speed will not run the motor at less than the Low Speed setting.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
