What parameter do you change to set up the ATV320 drive to run on a fan or pump application?
Issue:
Set up the ATV320 drive to run on a fan or pump application.
Product Line:
Altivar ATV320
Environment:
All
Cause:
Want to set up the ATV320 for fan and pump applications.
Resolution:
The ATV320 works well on variable torque and constant torque applications. The default is for common constant torque loads. A centrifugal pump and fan are variable torque loads. Set the Motor control type to V/F Quadratic.
Go to Conf -> FULL
Menu drC
Parameter Ctt, set to [V/F Quad.] (UFq): Variable torque. For pump and fan applications.
Set up the ATV320 drive to run on a fan or pump application.
Product Line:
Altivar ATV320
Environment:
All
Cause:
Want to set up the ATV320 for fan and pump applications.
Resolution:
The ATV320 works well on variable torque and constant torque applications. The default is for common constant torque loads. A centrifugal pump and fan are variable torque loads. Set the Motor control type to V/F Quadratic.
Go to Conf -> FULL
Menu drC
Parameter Ctt, set to [V/F Quad.] (UFq): Variable torque. For pump and fan applications.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.