Issue:
Is it possible to control speed of drive using 2 potentiometers in different locations?
Product Line:
All Altivar drive products.
Environment:
All models, All serial numbers
Cause:
Customer needs to be able to control the speed of the drive from 2 different locations at the same time.
Resolution:
No, this is not possible by using parallel potentiometers. The drive will only follow a single speed reference at any given time.
The drive can be switched between two different potentiometers via a logic input but it can not follow two different potentiometers at once.
Some drives allow 2 separate analog input signals to be summed or added together to set the speed reference.
Is it possible to control speed of drive using 2 potentiometers in different locations?
Product Line:
All Altivar drive products.
Environment:
All models, All serial numbers
Cause:
Customer needs to be able to control the speed of the drive from 2 different locations at the same time.
Resolution:
No, this is not possible by using parallel potentiometers. The drive will only follow a single speed reference at any given time.
The drive can be switched between two different potentiometers via a logic input but it can not follow two different potentiometers at once.
Some drives allow 2 separate analog input signals to be summed or added together to set the speed reference.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
