Please check the following points:
1. check wiring diagram.
Note: If customer use XVUC9VP, it must be mounted in the bottom layer, then mount XVUC29P, and then mount single color light.
2. Please debug the pulse signal of PLC output with oscilloscope. the frequency must be 500ms. and the pulse signal definition for each command as below:
3. If it still doesn't work, please send back the product to us for expertise or refer to FAQ "How to use pulse signal unit XVUC29P?".
1. check wiring diagram.
Note: If customer use XVUC9VP, it must be mounted in the bottom layer, then mount XVUC29P, and then mount single color light.
2. Please debug the pulse signal of PLC output with oscilloscope. the frequency must be 500ms. and the pulse signal definition for each command as below:
3. If it still doesn't work, please send back the product to us for expertise or refer to FAQ "How to use pulse signal unit XVUC29P?".
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
