Issue:
Program the ATV630 for 2-wire control and connect the start / stop.
Product Line:
ALTIVAR 630
Environment:
All serial numbers
Cause:
Installation / Setup
Resolution:
Go to menu 5 Complete Settings
Go to menu 5.5 Command and Reference
Set 2/3 wire type to 2 wire .
24V to DI1 = forward (normally open , maintained close to start)
Program the ATV630 for 2-wire control and connect the start / stop.
Product Line:
ALTIVAR 630
Environment:
All serial numbers
Cause:
Installation / Setup
Resolution:
Go to menu 5 Complete Settings
Go to menu 5.5 Command and Reference
Set 2/3 wire type to 2 wire .
24V to DI1 = forward (normally open , maintained close to start)
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
