Is it possible to configure one port on the HMIGTU to communicate with a PLC on one subnet, and the other port to communicate to a PLC on a different subnet?
Issue:
Can the HMIGTU communicate to devices on two different subnets?
Product Line:
HMIGTU
Resolution:
It is possible for an Magelis HMIGTU (HMIG3U or HMIG5U) to communicate to two PLC's on a different subnets.
I have attached a screen capture on how you would configure Vijeo Designer. The Runtime will automatically route the device to the Ethernet port on the correct subnet.
Can the HMIGTU communicate to devices on two different subnets?
Product Line:
HMIGTU
Resolution:
It is possible for an Magelis HMIGTU (HMIG3U or HMIG5U) to communicate to two PLC's on a different subnets.
I have attached a screen capture on how you would configure Vijeo Designer. The Runtime will automatically route the device to the Ethernet port on the correct subnet.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.