NetBotz 750 | How do I connect serially?
Issue:
How do I serially connect to the NetBotz 750?
Product Line:
NetBotz version 5.X
Environment:
NetBotz v5.X
Cause:
Serial parameters and drivers are required to establish a serial connection between a computer and the NetBotz appliance.
Resolution:
The NetBotz 750 uses the following serial parameters:
- Baud Rate: 115200
- Data Bits: 8
- Parity: None
- Stop Bits: 1
- Flow Control: None
To log in and configure the 750 with an IP, you will need to log in with root as the user and you will be prompted for a password.
If you connect your NetBotz 750 to your computer and do not see it show up as a serial port (unknown device), you need to download the driver:
Serial port driver - Silcon Labs CP2103
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
How do I serially connect to the NetBotz 750?
Product Line:
NetBotz version 5.X
Environment:
NetBotz v5.X
Cause:
Serial parameters and drivers are required to establish a serial connection between a computer and the NetBotz appliance.
Resolution:
The NetBotz 750 uses the following serial parameters:
- Baud Rate: 115200
- Data Bits: 8
- Parity: None
- Stop Bits: 1
- Flow Control: None
To log in and configure the 750 with an IP, you will need to log in with root as the user and you will be prompted for a password.
If you connect your NetBotz 750 to your computer and do not see it show up as a serial port (unknown device), you need to download the driver:
Serial port driver - Silcon Labs CP2103
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.