Altivar 320 Variable Speed Drive: Programming a Flashing Output Signal Using Logic Functions
Using 2 timers it is possible to program a flashing signal.
Min setting is 0.1second up a level, 0.1second down a level.
See Altivar 320 logic in the attachment.
The output of the logic is connected to relay output (for test only)
The first timer defines period of the signal, second timer defines duration of the signal up a level
Min setting is 0.1second up a level, 0.1second down a level.
See Altivar 320 logic in the attachment.
The output of the logic is connected to relay output (for test only)
The first timer defines period of the signal, second timer defines duration of the signal up a level
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.