How to read the version of VW3A1111 display?
Fw version used in VW3A111 HMI can be read from:
- from HMI directly during powering up the drive where HMI is placed, see picture attached. 1.2 IE 39 is fw version in my case
- by reading the content of keypad_id.bin file present in HMI, see attached file. The file can be read when you connect HMI to PC via usb. The file is in folder KPCONF.
- from HMI directly during powering up the drive where HMI is placed, see picture attached. 1.2 IE 39 is fw version in my case
- by reading the content of keypad_id.bin file present in HMI, see attached file. The file can be read when you connect HMI to PC via usb. The file is in folder KPCONF.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.