Interference occurs when unwanted radio frequency signals disrupt the use of the JR900 trio radio.
To mitigate the noise or interference on a JR900 trio radio network alter the following radio parameters.
1. Set the hopping interval on a faster rate.
2. Increase the data retransmision parameter.
3. Enable collision avoidance.
4. Enable force retransmissions accross separate hops only when sending critical data on a noisy network.
Note: That adjusting the above will improve network reliability but it make the network more slower.
To mitigate the noise or interference on a JR900 trio radio network alter the following radio parameters.
1. Set the hopping interval on a faster rate.
2. Increase the data retransmision parameter.
3. Enable collision avoidance.
4. Enable force retransmissions accross separate hops only when sending critical data on a noisy network.
Note: That adjusting the above will improve network reliability but it make the network more slower.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
