Find how much memory size and available free memory in Scadapack E series devices.
To find how much memory is available and size using the following.
1. Connect to the Scadapack E RTU device using the Scadapack E configurator> Remote Command line.
On the command prompt type Free command.
2. using Putty and enable the telnet service or used the command line on the serial port of the Scadapack E series device.
1. Connect to the Scadapack E RTU device using the Scadapack E configurator> Remote Command line.
On the command prompt type Free command.
2. using Putty and enable the telnet service or used the command line on the serial port of the Scadapack E series device.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.