Can I assign or change digital input functions from the I/O menu in SoMove?
Resolution:
No. The Digital Inputs section in the I/O menu of SoMove is read‑only and is used for monitoring input assignments only.
To assign or change the function of a digital input, you must go to the specific function parameter you want to control (such as Stop, Forward/Reverse, Fault Reset, etc.) and then assign the desired digital input from within that function’s settings.
In other words, digital inputs are assigned from the function side, not from the I/O menu itself.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance: