You need to use the diagnostic option to monitor the Scan time or Cycle time under CAM 3 of WB 6.5,
please notice you need to be in debugging mode to see the timings.
Last measured cycle time corresponds to Current under legacy.
Maximum measured cycle time corresponds to Maximum under legacy.
Programmed cycle time corresponds to Allow under legacy.
Cycle time overflow count corresponds to Overflow under legacy.
please notice you need to be in debugging mode to see the timings.
Last measured cycle time corresponds to Current under legacy.
Maximum measured cycle time corresponds to Maximum under legacy.
Programmed cycle time corresponds to Allow under legacy.
Cycle time overflow count corresponds to Overflow under legacy.