RemoteConnect to SCADAPAck x70 communication protocol and communication link selection
The PC Communication defines the communication protocol and communication link used for communication between a personal computer (PC) running RemoteConnect software and a target controller, SCADAPack 47x or SCADAPAck 57x. To change communication settings:
1. Open RemoteConnect software
2. Open project that has to be downloaded to SCADAPack x70
3. Click the "PC Communication Settings - DNP3 CommDTM
4. Click the "Offline - PC Communication Settings" tab
5. In the "Connection Type" box select PC Communication Type/Protocol
6. In the box "Serial Communication Settings" configure communication port
7. Click the Apply button
1. Open RemoteConnect software
2. Open project that has to be downloaded to SCADAPack x70
3. Click the "PC Communication Settings - DNP3 CommDTM
4. Click the "Offline - PC Communication Settings" tab
5. In the "Connection Type" box select PC Communication Type/Protocol
6. In the box "Serial Communication Settings" configure communication port
7. Click the Apply button
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.