EPS UPSs or SSC with GUI that the touch point is off
Public
Issue:
EPS UPSs or SSC with GUI that the touch point is off
Product line:
All EPS UPSs or SSC with GUI
Environment:
All EPS UPSs or SSC with GUI
Cause:
The touch point is off on the GUI and needs to be calibrated to reset touch point.
Resolution:
How to calibrate the GUI:
1. Click on Start->Settings->Control Panel->Stylus->Calibration->Recalibrate.
2. Calibrate the five point accurately.
3. Press ENTER if keyboard is connected else TAP on the screen, it will exit the calibration screen.
4. Save registry from Start->Programs->ColibriTools->SaveReg.
Issue:
EPS UPSs or SSC with GUI that the touch point is off
Product line:
All EPS UPSs or SSC with GUI
Environment:
All EPS UPSs or SSC with GUI
Cause:
The touch point is off on the GUI and needs to be calibrated to reset touch point.
Resolution:
How to calibrate the GUI:
1. Click on Start->Settings->Control Panel->Stylus->Calibration->Recalibrate.
2. Calibrate the five point accurately.
3. Press ENTER if keyboard is connected else TAP on the screen, it will exit the calibration screen.
4. Save registry from Start->Programs->ColibriTools->SaveReg.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.