Will upgrading the firmware on an APC PDU cause loss of power to the outlets?
Issue:
Will the firmware upgrade process on my APC PDU cause the unit to stop supplying power to its outlets?
Product Line:
APC Rack PDU - AP7***B, AP8*** and APDU9***
Cause:
As long as the PDU is operating normally and there are no active alarms, a firmware upgrade of the management interface will not power on/off any attached loads.
The network management card will reboot during the process, but this will not affect the attached load.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.